Shopping Cart

Replacing Seat Packers

Replacing Seat Packers


Step 1:

Flip seat over and remove the 6g Phillip head screws holding the seat to the rolling platform. There will be two M4 washers on the screw and its important these are retained as they prevent any minor variation in screw length to ensure the screws do not penetrate through the seat top.

Replacing Seat Packers


Step 2:

Lift up undercarriage away from the seat and remove the old spacers.

Replacing Seat Packers


Step 3:

Put bigger or smaller spacers of choice (6,12, or 18mm) on the seat and then put undercarriage in position on top.

Replacing Seat Packers     Replacing Seat Packers


Step 4:

Each size spacer requires a different length screw. Please refer to the table showing what length screws are need for which size spacer.

Spacer

6g – Phillips - Screw

Washers

6mm

¾ inch

M4 Flat washer x2

12mm

1 inch

M4 Flat washer x2

18mm

1 ¼ inch

M4 Flat washer x2

 

Replacing Seat Packers 

When putting new screws in remember to transfer the washers across from old screws or replace with new ones.


Step 5:

Tighten up screws till firmly tight and ensure there is not gap between the spacer and the seat. You have successfully adjusted/changed the seat packers on the seat.

Replacing Seat Packers     Replacing Seat Packers


Sale

Unavailable

Sold Out