Shopping Cart

Mould 422

Mould 422

Suggested weight range

60 – 82.5kg





Beam At Waterline


This boat was originally designed and built to accommodate rowers in the lighter school and club weight range and still be under the 12m (shipping container) length. It has a similar cross section to the Men's Heavyweight 4-/X but is shorter resulting in a smaller wetted surface area. This boat will perform well, even for those slightly lacking in skills.

For further information on this mould or Sykes' other boats, please contact us.


Our club recently took delivery of yet another Sykes quad/four  (this one a mould 422).  We are a masters club with membership about 50/50 men/women, so flexibility is important to us. This new boat has been a huge success (as have all our Sykes quad/fours over the past 10 years).  It has quick-release riggers, which allow us fast changes from four to quad and back again at regattas. It also has frig rig plates which allow us to swap the sweep riggers to any position, so we can change to any sort of seating arrangement.  We use pop-out pin spacers so we can quickly change swivel heights.  All this gives us the fast flexibility we need with a membership of all sorts of ages and sizes and abilities.  The boat is a dream to row, fast and maneuverable.
Sue Wannan, North Shore Rowing Club


Our small Tasmanian club purchased a new Sykes 4-/4x- Carbon Coxless Wing Four Mould 422, with the boat arriving in late 2015.  We went through an extensive process before selecting this boat, including looking at a range of second hand boats.  In the end, the Sykes boat was actually seen as far better value for money.  As a small club from a lower socio-economic region, we also saw the Sykes boats as being very durable and therefore again value for money.  We do also have seven other older Sykes boats (all pre-2000, two 2x/2-, three 4x/4 with one being timber, two VIIIs including one timber), and they are all still in regular action, and are all still very row-able even 30-40 years after their original purchase.

Before and after the purchase, the Sykes team were very professional to deal with through the processes, and assisted greatly in organizing delivery to the club’s door. 
Peter Nichols, NNRC President

Spectra Steering System image

Spectra Steering System

Spectra is a Kevlar-based product that is corrosion-proof and easy to use. Compared to the stainless steel wiring mechanism, the spectra system is lighter, more durable, corrosion proof and it does not stretch. A great innovation by Sykes.

Dual Locking Backarm image

Dual Locking Backarm

The new sliding adjustable type back arms have a dual locking system. The 6mm bolt locks the backarm in place via an internal nut. The large ribbed plastic locknut is then tightened against the end of the back arm tube. This gives secondary support and ensures the force is well supported. The adjustment range is 70mm which easily allows for span changes on the rigger.

Pin Block Measuring Tapes image

Pin Block Measuring Tapes

All Sykes boats come with span/spread measuring tapes applied on the pin block below each oarlock pin.

Waterbottle Holder image

Waterbottle Holder

In the stern-end bulkhead under each seat deck a, is a standard bicycle-sized water bottle holder. Whilst fitted as a standard feature, they add approx. 110grm to the total weight of the hull.

Make an inquiry

Inquire now arrow-right



Sold Out